Attention Red Line Oil customers: Please be advised that we are not accepting walk-in customers at our Benicia office at this time due to COVID-19. You may place an order at redlineoil.com or call us at (707) 745-6100. All orders will be shipped to your requested address at our standard shipping rate. We apologize for the inconvenience and hope to open our doors again to you in the near future. Thank you for supporting Red Line Oil, we appreciate your business.

 
Menu
Find Products
For My Vehicle
You have no items in your shopping cart.
Menu
Engine Oil Break-In Additive

Engine Oil Break-In Additive

Buy cheap motor oil for break-in? Only if you add this…

Check Compatibility

Didn't Find Your Vehicle?
Didn't Find Your Vehicle?
Engine Oil Break-In Additive

Engine Oil Break-In Additive

  • Provides conventional motor oils with antiwear additives like zinc and phosphorus (ZDDP) necessary to protect against camshaft and valvetrain damage on break-in
  • Allow pistons rings to seat properly with less-slick oil, while antiwear additives protect other engines components to avoid excessive wear
  • Can also be used in conventional and synthetic oils during regular operation, providing an extra package of protection otherwise not found in most motor oils
  • 16oz bottle treats up to 12 quarts of motor oil--in many cases, one bottle can serve two engines or oil changes
SKU: 81403
$13.95
Find Near You

Featured Retailers

Summit
Amazon
HRP World
ECS Tuning

Racing oils provide more wear protection than motor oils for passenger vehicles, however, these products contain fewer detergents and are not suitable for street use

  • Reformulated for improved frictional properties
  • Special detergents for improved lubricity and less detonation
  • Polyol ester base stocks provide more stability and film strength when exposed to excess fuel dilution
  • Each of these products has no less than 2200ppm of zinc and phosphorus for antiwear
  • Each race oil product is a multi-grade, offering 2-4% more power than oil of a similar viscosity - 20WT is a 5W20, 30WT is a 10W30, 40WT is a 15W40, 50WT is a 15W50
  • Improved protection at startup, lower oil temp, cleanliness
  • Remember to change these oils more frequently than regular motor oils

Data Sheet Downloads

Available Sizes

16oz 81403

Increases antiwear level per quart when using One Bottle (16oz.):

Capacity - Phosphorus - Zinc
15 quarts - 610 ppm - 736 ppm
12 quarts - 763 ppm - 920 ppm
10 quarts - 915 ppm - 1104 ppm
8 quarts - 1145 ppm - 1380 ppm
7 quarts - 1307 ppm - 1577 ppm
6 quarts - 1525 ppm - 1840 ppm
5 quarts - 1830 ppm - 2208 ppm
4 quarts - 2288 ppm - 2760 ppm
1 quart - 9160 ppm - 11040 ppm

Half Bottle (8oz.) when treating:

Capacity - Phosphorus - Zinc
12 quarts - 382 ppm - 460 ppm
10 quarts - 458 ppm - 552 ppm
8 quarts - 572 ppm - 690 ppm
6 quarts - 763 ppm - 920 ppm
5 quarts - 915 ppm - 1104 ppm
4 quarts - 1145 ppm - 1380 ppm

One Quarter Bottle (4oz) when treating:

Capacity - Phosphorus - Zinc
6 quarts - 382 ppm - 460 ppm
5 quarts - 458 ppm - 552 ppm
4 quarts - 572 ppm - 690 ppm
3 quarts - 763 ppm - 920 ppm

Bottle (16oz) contains:
33.8 grams total ZDDP (zinc dialkyldithiophosphate)
17,000 ppm, 7.8 grams Phosphorus (P)
20,500 ppm, 9.4 grams Zinc (Zn)
16.6 grams Sulphur (S)

About
Products
Copyright © 2020. All rights reserved.
Copyright © 2020. All rights reserved.
Terms and Conditions Privacy Statement California Transparency in Supply Chains Disclosure