|
| Home > Motor Oil > 10W40 Motorcycle Oil |
|
|
 |
|
- As specified for are four-stroke motocross bikes ATVs, and Sportbikes
- Blended with specific friction modifiers that are compatible with wet-clutches
- Superior film strength through the use of ester base stocks for protection and ring seal
- Extended drain intervals over other brands due to higher quality basestocks and excellent dispersants
|
|
|
| ABOUT RED LINE |
|
- Fully-synthetic ester formula for passenger cars, light trucks, performance vehicles and marine applications
- Excellent wear protection and friction reduction across a wide range of operating conditions
- High detergency allows extended drain intervals and provides increased cleanliness
- Improved fuel economy and ring seal for more power
- Superior high temperature stability and oxidation resistance increases lubrication of hot metal compared to other synthetics
- High natural viscosity index (VI) provides thicker oil film in bearings and cams
- Less evaporation than other synthetics for improved efficiency and ring seal
- All products are completely compatible with other conventional and synthetic motor oils
|
|
| ALSO AVAILABLE FROM OUR DEALERS |
|
- 42404 - 10W40 Motorcycle Oil - quart
- 42405 - 10W40 Motorcycle Oil - gallon
|
|
|
| TYPICAL PROPERTIES |
|
| API Service Class |
SJ/SG/SH JASO MB |
| Viscosity Grade |
SAE 10W40 |
| Vis @ 100°C, cSt |
14 |
| Vis @ 40°C, cSt |
88.7 |
| Viscosity Index |
163 |
| CCS Viscosity, Poise, @*C |
65@-25 |
| Pour Point, °C |
-45 |
| Pour Point, °F |
-49 |
| Flash Point, °C |
249 |
| Flash Point, °F |
480 |
| Zinc, %wt |
0.25 |
| Phosphorous, %wt |
0.21 |
| Molybdenum, %wt |
0.05 |
| NOACK Evaporation Loss,1hr @ 482°F (250°C), % |
5 |
| % Viscosity Loss, 30 Pass ASTM D6278 |
0 |
|
|
|
|
|
|